Home - Knowledge - Details

How is the backlight produced

The production process of backlight mainly includes the following steps:

Chip preparation: The core of LED backlight is the LED chip, which includes steps such as crystal growth, cutting, cleaning, and sapphire substrate preparation. Crystal growth is the most critical step, which involves controlling the crystallization process of materials under specific conditions to prepare crystals with specific structures and physical properties. Cutting is to cut the grown crystal into small pieces, while cleaning and sapphire substrate preparation are to ensure the surface purity and flatness of the chip


Packaging technology: After the preparation of LED chips is completed, they need to be packaged to protect the chips and facilitate subsequent assembly and application. Packaging technologies include conductive adhesive packaging, adhesive free packaging, and ball grid packaging. Conductive adhesive packaging is the most common method, which involves placing the chip on the packaging base and using conductive adhesive for fixation and electrical connection


Coating of luminescent layer: The luminescent layer is an important component of LED backlight, which determines the luminous effect and color performance of the LED. Luminescent layer coating is the process of coating a luminescent powder solution onto an LED chip, including steps such as solution preparation, coating, and curing. The preparation of the solution requires precise control of the type and concentration of luminescent powder, and the coating process requires control of the uniformity and thickness of the coating


Backlight assembly: Assemble multiple LED chips in a certain arrangement on a base to improve light efficiency and uniformity. During the assembly process, materials such as light guide plates, diffusion films, and reflective films need to be used


Welding and testing: Weld the LED onto the PCB board and conduct testing to ensure good photoelectric parameters and light uniformity. During the testing process, it is necessary to check the brightness, uniformity, and stability of the backlight source


Packaging: Packaging and storing finished products according to requirements, preparing for sale
 

Send Inquiry

You Might Also Like