Home - News - Details

The Production Process Of Customized Segment Code LCD Display Screen

The production process of customized segment code LCD display screen mainly includes the following steps:

Front end process flow: including etching processing of ITO patterns. The specific steps are as follows:

Investment of ITO glass: Select suitable ITO glass according to product requirements and ensure that the model specifications meet the requirements.
Cleaning and drying of glass: Use cleaning agents and double distilled water to clean ITO glass and dry it to ensure processing quality.
Apply photoresist: Apply a layer of photoresist evenly on the conductive surface of ITO glass and preheat it.
Pre baking: Baking glass coated with photoresist at a specific temperature to evaporate the solvent and enhance adhesion.
Exposure: Use ultraviolet light to irradiate the surface of the photoresist through a mask, causing the photoresist in the illuminated area to react.
Development: Use a developing solution to remove the exposed photoresist layer and retain the unexposed portion.
Hard film: Perform high-temperature treatment again to make the photoresist more firm.
Etching process: Etch off the ITO film without photoresist cover with acid etching solution to form the desired ITO electrode pattern.

Film removal: Use caustic soda solution to remove the remaining photoresist.
Cleaning and drying: Clean residual caustic soda solution and photoresist residue with industrial pure water

Central manufacturing: including coating and cleaning of TOP film after curing. The coating process of TOP film is to apply SiO2 coating after photolithography technology to fill the gaps between the ion implantation area and the non ion implantation area, cover the electrode, and improve the angle characteristics


The second half of the process: including the protection, printing, assembly and other processes of the segmented LCD screen. The specific steps are as follows:

Protective layer printing: Printing a protective layer on the surface of glass to protect the glass and the film on top.
Alignment film printing: Printing alignment film on the surface of glass.
Directional hair wheel processing: Use directional hair wheels to brush marks on the PI film of the glass to determine the direction of the circuit arrangement.
Frame printing: Print the frame onto the upper glass and connect the bottom glass together.
Place the spacer: Ensure that the distance between the upper and lower glass is even.
UV glue fixation: Use UV glue to combine the glass together to avoid misalignment.
Solid baking: hardening the frame adhesive under high pressure to ensure that the distance between two pieces of glass meets the requirements

Customization process: Specific parameters such as product size, thickness, working temperature, and pin connection method need to be confirmed before mold opening. Drawing drawings usually takes 3-6 days, and the pass rate for mold opening varies depending on the information provided, generally ranging from 80% to 99.9%
 

Send Inquiry

You Might Also Like